TEST MODELS-3 IMPLEMENTATION - Static
!
!	Mechanism input not specified because it is set by INTRUN using
!	data in the parameter file
MODEL=
!
!	Save output in .CDT format
SAVE
!
!	"." indicates end of option input and start of run condition input.
.
!
!	Label on output
.LBL1 TEST1,STATIC,URBAN,NOx=.15
!
!	Output results every 30 minutes.
!	Do the simulation for the first period for 12 hours.
.DPRN 30.
.TEND 720.
!
!	Temperature constant at 300K, no dilution.
.TEMP 300.
.DIL  0.0
!
!	Initial inorganic concentrations
NO   0.10
NO2  0.05
HONO 0.001
SO2  0.05
!
!	Input composition in emissions file.  These files are normalized
!	to 1 ppmC, so one ppmC of VOC input.
!	LUMP input is converted to model species by LUMPINT, which is called
!	by INTRUN.  Uses .LPC file specified in the parameter file.
.LUMP
@AIRTEST.CMP
.
!	Photolysis rates for z=0, StdZA660.
#NO2 6.69e-1
#NO3NO 1.59e+0
#NO3NO2 1.50e+1
#O3O3P 3.76e-2
#O3O1D 4.19e-3
#HONO-NO 1.27e-1
#HONO-NO2 1.60e-2
#HNO3 5.40e-5
#HO2NO2 4.69e-4
#H2O2 5.64e-4
#HCHO_R 2.32e-3
#HCHO_M 3.15e-3
#CCHO_R 4.16e-4
#C2CHO 1.40e-3
#ACETONE 4.16e-5
#KETONE 9.49e-4
#COOH 3.94e-4
#GLY_R 8.93e-3
#GLY_ABS 1.81e-1
#MGLY_ADJ 1.10e-2
#BACL_ADJ 1.90e-2
#BZCHO 6.22e-2
#ACROLEIN 3.32e-2
#IC3ONO2 2.35e-4
#MGLY_ABS 2.06e-1
!
!	Set the parameters input so far as the defaults for the subsequent
!	calculations.
.SETDEF
!
!	Do the simulation for the first period
.INT
!
!	The next simulation is a continuation of the previous one.
!	Concentrations are not re-initialized.
.CONT
!
!	Set the light intensity to zero for dark photolysis.
HV	0.0
!
!	Do the simulation until total time is 1440 minutes, i.e., for
!	another 12 hours.
.TEND 1440.
!
!	Do the simulation and append the results to the previous one.
.INTAPND
.CONT
!
!	The next simulation is a simulation of the previous one, with
!	the results appended.  Simulation with lights on again, for an
!	additional 12 hours.
HV	1.0
.TEND 2160
.INTAPND